Industrial Temperature Measurement Solutions
Technical solution paths connect verified products with process conditions, industries and applications.
Temperature Sensors for Engine Test Cells
Engine test cell temperature sensors are selected around the test point, not the test-cell label. Exhaust gas, lube oil, coolant, pipe and component surfaces each present a different measurement question.
Read moreTemperature Sensors for Forging Furnaces
Forging furnace temperature sensors support measurement around billet heating, furnace zones, dies and related heat-treatment operations. The correct choice follows the point and handling conditions.
Read moreTemperature Sensors for Storage Tanks
Storage tank temperature sensors are selected around the tank point, access and signal path. The tank service and the intended measurement location should lead the discussion.
Read moreFlue Gas Temperature Measurement
Flue gas temperature measurement is a point-specific task in boiler and power systems. Furnace, uptake and flue paths can differ in access, atmosphere, heat and mounting.
Read moreBoiler Feedwater & Condensate Temperature Sensors
Boiler feedwater and condensate temperature sensors are selected for the actual water-system point, connection and signal path. These measurements should be separated from hotter gas or steam duties.
Read moreTurbine Temperature Monitoring
Turbine temperature monitoring brings together turbine, bearing and auxiliary points that may use different sensors and signal paths. Start with the equipment location and monitoring purpose.
Read moreCooling-Water Temperature Sensors for Power Plants
Power-plant cooling-water temperature sensors are selected around the cooling circuit point, connection and monitoring interface. A pipe, vessel or auxiliary location may require a different assembly.
Read moreSensors for Foundry Melting & Holding Furnaces
Foundry melting and holding furnace sensors are selected around the furnace point, measurement method and instrument interface. Melting and holding duties should be described separately when their locations differ.
Read moreEngine Lube Oil Temperature Measurement
Engine lube oil temperature measurement connects an oil-system point to the test instrument used to record engine behaviour. Sensor choice depends on the actual point, fitting and test arrangement.
Read moreTemperature Sensors for Automotive Heat-Treatment Furnaces
Automotive heat-treatment furnace temperature sensors are chosen by furnace zone, thermal cycle, atmosphere, mounting and the control or recording system receiving the signal.
Read moreTemperature Sensors for Process Vessels
Process-vessel temperature sensors are chosen by the vessel point, medium, connection and signal path. A vessel wall, immersion point and external surface can require different assemblies.
Read morePipeline Temperature Measurement
Pipeline temperature measurement may use a pipe-surface assembly or an inserted point. The measurement question, pipe arrangement and mounting method should be defined before selecting a sensor.
Read moreSteam Line Temperature Sensors
Steam-line temperature sensors are selected around the line point, connection, signal and installation context. The sensor and its mounting arrangement need to be considered together.
Read moreRTD Sensors for Turbine Bearings
Turbine bearing RTD sensors are selected around the bearing location, mechanical fit and monitoring-system interface. A clear point description is more useful than a generic turbine specification.
Read more